top of page


Why Laser Cutting?

  • No tooling cost

  • Rapid prototyping

  • Greater accuracy

  • Quick turn around


Why Laser Cutting – One of the more important advantages of laser cutting is that of time and in turn the cost.


The need for hard tooling is eliminated and this can save many thousands of pounds, and several weeks delay. Modifications can be made instantly.

The virtues of laser cutting or laser profiling have been rigorously portrayed since the process became regularly used as a sub-contract service, around twenty-five years ago. A large amount of laser cutting work would, at one time have been carried out by gas cutting.  Laser cutting does not cause distortion through heat. It leaves a clean edge and is able to include holes and cut outs of close to any shape or size.


Laser cutting provides customers with a consistent product that can, in most cases be integrated immediately into their product. The fact that standard tolerances for laser cutting are around 20% of those for gas cutting is an added bonus to many customers and not a strict requirement. This should answer the question, ‘Why Laser Cutting?’ but if you have any further questions then contact us here.

Our Capabilities

  • MIld Steel - Up to 15mm Thick

  • Stainless Steel - Up to 12mm Thick

  • Aluminum - Up to 10mm Thick

  • Brass - Up to 5mm Thick

  • Copper - Up to 5mm Thick

We currently have 3 Lasers

  • Amada X1 4W Laser - Bed size 3000mm x 1500mm.

  • Amada Alpha III 4KW Laser - Bed size 3000mm x 1500mm.

  • Mazak 4KW Fibre Laser -Bed size 3000mm x 1500mm.

  • LinkedIn - White Circle
  • Twitter - White Circle
bottom of page